schrieb Joseph Wright:
> We really need to see all of you log file. The latest release versions
> of the LaTeX3 material all work fine, and define \ExplFileName, etx. I
> suspect that something is being loaded 'out of place', but without the
> full log can't tell.
Sorry for not sending the full log file in the first place. I have
suspected it's a problem with the recent reorganization in l3 packages.
But since you can't reproduce it ... perhaps it's a Windows specific TL
packaging error (Windows 7 Prof. x64)?
Anyway, here's the log. Unfortunately, batchmode doesn't give me a full
package list.
Best regards,
Stephan Hennig
This is LuaTeX, Version beta-0.70.1-2011082320 (rev 4277) (format=lualatex 2011.8.25) 25 AUG 2011 17:13
**mbsp
(./mbsp.tex
LaTeX2e <2011/06/27>
LuaTeX adaptation of babel <v3.8l-luatex-1.4> and hyphenation patterns for engl
ish, dumylang, nohyphenation, loaded.
(f:/texlive/2011/texmf-dist/tex/latex/base/article.cls
Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
(f:/texlive/2011/texmf-dist/tex/latex/base/size10.clo
File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
)
\c@part=\count79
\c@section=\count80
\c@subsection=\count81
\c@subsubsection=\count82
\c@paragraph=\count83
\c@subparagraph=\count84
\c@figure=\count85
\c@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
) (f:/texlive/2011/texmf-dist/tex/latex/fontspec/fontspec.sty
Package: fontspec 2011/02/26 v2.1f Advanced font selection for XeLaTeX/LuaLaTeX
(f:/texlive/2011/texmf-dist/tex/latex/expl3/expl3.sty (f:/texlive/2011/texmf-di
st/tex/latex/expl3/l3names.sty
Package: l3names 2011/01/08 v2122 L3 Experimental Naming Scheme for TeX Primiti
ves
(f:/texlive/2011/texmf-dist/tex/generic/oberdiek/luatex.sty
Package: luatex 2010/03/09 v0.4 LuaTeX basic definition package (HO)
(f:/texlive/2011/texmf-dist/tex/generic/oberdiek/infwarerr.sty
Package: infwarerr 2010/04/08 v1.3 Providing info/warning/message (HO)
) (f:/texlive/2011/texmf-dist/tex/generic/oberdiek/ifluatex.sty
Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO)
Package ifluatex Info: LuaTeX detected.
) (f:/texlive/2011/texmf-dist/tex/latex/etex-pkg/etex.sty
Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB)
\et@xins=\count87
)
\LuT@AllocAttribute=\count277
\LuT@AllocCatcodeTable=\count278
\CatcodeTableStack=\count279
\CatcodeTableIniTeX=\catcodetable1
\CatcodeTableString=\catcodetable3
\CatcodeTableOther=\catcodetable5
\CatcodeTableLaTeX=\catcodetable7
(f:/texlive/2011/texmf-dist/tex/generic/oberdiek/luatex-loader.sty
Package: luatex-loader 2010/03/09 v0.4 Lua module loader (HO)
(f:/texlive/2011/texmf-dist/scripts/oberdiek/oberdiek.luatex.lua))) (f:/texlive
/2011/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty
Package: pdftexcmds 2011/04/22 v0.16 Utilities of pdfTeX for LuaTeX (HO)
(f:/texlive/2011/texmf-dist/tex/generic/oberdiek/ltxcmds.sty
Package: ltxcmds 2011/04/18 v1.20 LaTeX kernel commands for general use (HO)
) (f:/texlive/2011/texmf-dist/tex/generic/oberdiek/ifpdf.sty
Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO)
Package ifpdf Info: pdfTeX in PDF mode is detected.
)
Package pdftexcmds Info: \pdf@primitive is available.
Package pdftexcmds Info: \pdf@ifprimitive is available.
Package pdftexcmds Info: \pdfdraftmode found.
\pdftexcmds@toks=\toks14
))
Package: expl3 2011/04/09 v2222 L3 Experimental code bundle wrapper
(f:/texlive/2011/texmf-dist/tex/latex/expl3/l3basics.sty
Package: l3basics 2011/04/23 v2246 L3 Experimental basic definitions
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3expan.sty
Package: l3expan 2011/04/09 v2223 L3 Experimental Argument Expansion module
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3tl.sty
Package: l3tl 2011/04/09 v2223 L3 Experimental Token Lists
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3int.sty
Package: l3int 2011/04/11 v2229 L3 Experimental Integer module
\l_tmpa_int=\count280
\l_tmpb_int=\count281
\l_tmpc_int=\count282
\g_tmpa_int=\count283
\g_tmpb_int=\count284
\c_max_int=\count285
\g_tl_inline_level_int=\count286
\g_prg_inline_level_int=\count287
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3quark.sty
Package: l3quark 2011/04/14 v2234 L3 Experimental Quark Commands
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3seq.sty
Package: l3seq 2011/04/21 v2245 The LaTeX3 kernel: sequences and stacks
\g_seq_nesting_depth_int=\count288
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3toks.sty
Package: l3toks 2011/04/09 v2223 L3 Experimental Token Registers
\l_tmpb_toks=\toks15
\l_tmpc_toks=\toks16
\g_tmpa_toks=\toks17
\g_tmpb_toks=\toks18
\g_tmpc_toks=\toks19
\c_empty_toks=\toks20
\l_tl_replace_toks=\toks21
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3prg.sty
Package: l3prg 2011/04/09 v2223 L3 Experimental control structures
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3clist.sty
Package: l3clist 2011/04/09 v2223 L3 Experimental comma separated lists
\g_clist_map_inline_int=\count289
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3token.sty
Package: l3token 2011/04/09 v2223 L3 Experimental token investigation and manip
ulation
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3prop.sty
Package: l3prop 2011/04/09 v2223 L3 Experimental Property Lists
\g_prop_inline_level_int=\count290
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3msg.sty
Package: l3msg 2010/10/02 v2052 L3 Experimental LaTeX Messages module
\l_msg_redirect_classes_prop=\toks22
\l_msg_redirect_names_prop=\toks23
\l_msg_redirect_fatal_prop=\toks24
\l_msg_redirect_error_prop=\toks25
\l_msg_redirect_warning_prop=\toks26
\l_msg_redirect_info_prop=\toks27
\l_msg_redirect_log_prop=\toks28
\l_msg_redirect_trace_prop=\toks29
\l_msg_redirect_none_prop=\toks30
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3io.sty
Package: l3io 2010/10/03 v2063 L3 Experimental i/o module
\g_iow_streams_prop=\toks31
\g_ior_streams_prop=\toks32
\l_iow_stream_int=\count291
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3skip.sty
Package: l3skip 2011/02/15 v2149 L3 Experimental skip registers
\l_tmpa_skip=\skip256
\l_tmpb_skip=\skip257
\l_tmpc_skip=\skip258
\g_tmpa_skip=\skip259
\g_tmpb_skip=\skip260
\l_tmpa_dim=\dimen256
\l_tmpb_dim=\dimen257
\l_tmpc_dim=\dimen258
\l_tmpd_dim=\dimen259
\g_tmpa_dim=\dimen260
\g_tmpb_dim=\dimen261
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3box.sty
Package: l3box 2011/04/09 v2223 L3 Experimental Box module
\l_tmpb_box=\box256
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3keyval.sty
Package: l3keyval 2011/04/09 v2223 L3 Experimental keyval processing
\l_KV_level_int=\count292
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3keys.sty
Package: l3keys 2010/11/11 v2082 L3 Experimental key-value support
\l_keys_choice_int=\count293
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3precom.sty
Package: l3precom 2011/04/09 v2223 L3 Experimental precompilation module
\g_gen_sym_int=\count294
\g_ggen_sym_int=\count295
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3xref.sty
Package: l3xref 2011/04/09 v2223 L3 Experimental cross referencing
\g_xref_all_curr_immediate_fields_prop=\toks33
\g_xref_all_curr_deferred_fields_prop=\toks34
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3file.sty
Package: l3file 2011/04/21 v2242 The LaTeX3 kernel: file operations
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3fp.sty
Package: l3fp 2011/03/19 v2201 L3 Experimental floating-point operations
\c_one_million=\count296
\c_one_hundred_million=\count297
\c_five_hundred_million=\count298
\c_one_thousand_million=\count299
\c_fp_pi_by_four_decimal_int=\count300
\c_fp_pi_by_four_extended_int=\count301
\c_fp_pi_decimal_int=\count302
\c_fp_pi_extended_int=\count303
\c_fp_two_pi_decimal_int=\count304
\c_fp_two_pi_extended_int=\count305
\l_fp_count_int=\count306
\l_fp_div_offset_int=\count307
\l_fp_exp_integer_int=\count308
\l_fp_exp_decimal_int=\count309
\l_fp_exp_extended_int=\count310
\l_fp_exp_exponent_int=\count311
\l_fp_input_a_sign_int=\count312
\l_fp_input_a_integer_int=\count313
\l_fp_input_a_decimal_int=\count314
\l_fp_input_a_exponent_int=\count315
\l_fp_input_b_sign_int=\count316
\l_fp_input_b_integer_int=\count317
\l_fp_input_b_decimal_int=\count318
\l_fp_input_b_exponent_int=\count319
\l_fp_input_a_extended_int=\count320
\l_fp_input_b_extended_int=\count321
\l_fp_mul_a_i_int=\count322
\l_fp_mul_a_ii_int=\count323
\l_fp_mul_a_iii_int=\count324
\l_fp_mul_a_iv_int=\count325
\l_fp_mul_a_v_int=\count326
\l_fp_mul_a_vi_int=\count327
\l_fp_mul_b_i_int=\count328
\l_fp_mul_b_ii_int=\count329
\l_fp_mul_b_iii_int=\count330
\l_fp_mul_b_iv_int=\count331
\l_fp_mul_b_v_int=\count332
\l_fp_mul_b_vi_int=\count333
\l_fp_mul_output_int=\count334
\l_fp_output_sign_int=\count335
\l_fp_output_integer_int=\count336
\l_fp_output_decimal_int=\count337
\l_fp_output_exponent_int=\count338
\l_fp_output_extended_int=\count339
\l_fp_round_position_int=\count340
\l_fp_round_target_int=\count341
\l_fp_split_sign_int=\count342
\l_fp_tmp_int=\count343
\l_fp_trig_octant_int=\count344
\l_fp_trig_sign_int=\count345
\l_fp_trig_decimal_int=\count346
\l_fp_trig_extended_int=\count347
\l_fp_tmp_dim=\dimen262
\l_fp_tmp_skip=\skip261
) (f:/texlive/2011/texmf-dist/tex/latex/expl3/l3luatex.sty
Package: l3luatex 2010/07/18 v1985 L3 Experimental LuaTeX functions
\g_cctab_allocate_int=\count348
\g_cctab_stack_int=\count349
\c_code_cctab=\catcodetable9
) (f:/texlive/2011/texmf-dist/tex/latex/tools/calc.sty
Package: calc 2007/08/22 v4.3 Infix arithmetic (KKT,FJ)
\calc@Acount=\count350
\calc@Bcount=\count351
\calc@Adimen=\dimen263
\calc@Bdimen=\dimen264
\calc@Askip=\skip262
\calc@Bskip=\skip263
LaTeX Info: Redefining \setlength on input line 76.
LaTeX Info: Redefining \addtolength on input line 77.
\calc@Ccount=\count352
\calc@Cskip=\skip264
)) (f:/texlive/2011/texmf-dist/tex/latex/l3packages/xparse/xparse.sty
! Undefined control sequence.
<argument> \ExplFileName
l.57 ...e}{\ExplFileVersion}{\ExplFileDescription}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<write> ...cls@pkg \space provides `\ExplFileName
'\@gobble \on@line .
l.57 ...e}{\ExplFileVersion}{\ExplFileDescription}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
LaTeX Warning: You have requested package `xparse',
but the package provides `'.
! Undefined control sequence.
<argument> \ExplFileDate
v\ExplFileVersion \ExplFileDescription
l.57 ...e}{\ExplFileVersion}{\ExplFileDescription}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<argument> \ExplFileDate v\ExplFileVersion
\ExplFileDescription
l.57 ...e}{\ExplFileVersion}{\ExplFileDescription}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<argument> ...plFileVersion \ExplFileDescription
l.57 ...e}{\ExplFileVersion}{\ExplFileDescription}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<write> Package: \@gtempa \space \ExplFileDate
v\ExplFileVersion \ExplFile...
l.57 ...e}{\ExplFileVersion}{\ExplFileDescription}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<write> ...space \ExplFileDate v\ExplFileVersion
\ExplFileDescription
l.57 ...e}{\ExplFileVersion}{\ExplFileDescription}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
<write> ...\ExplFileVersion \ExplFileDescription
l.57 ...e}{\ExplFileVersion}{\ExplFileDescription}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
Package: v
! Package xparse Error: Support package l3kernel too old..
See the xparse package documentation for explanation.
Type H <return> for immediate help.
...
l.69 }
Please install an up to date version of l3kernel using your TeX package manager
or from CTAN.\\\\Loading xparse will abort!
)
! Missing number, treated as zero.
<to be read again>
v
l.21 \input
binhex.tex % before expl syntax!
A number should have been here; I inserted `0'.
(If you can't figure out why I needed to see a number,
look up `weird error' in the index to The TeXbook.)
! Missing = inserted for \ifnum.
<to be read again>
v
l.21 \input
binhex.tex % before expl syntax!
I was expecting to see `<', `=', or `>'. Didn't.
! Missing number, treated as zero.
<to be read again>
v
l.21 \input
binhex.tex % before expl syntax!
A number should have been here; I inserted `0'.
(If you can't figure out why I needed to see a number,
look up `weird error' in the index to The TeXbook.)
! LaTeX Error: Missing \begin{document}.
See the LaTeX manual or LaTeX Companion for explanation.
Type H <return> for immediate help.
...
l.21 \input
binhex.tex % before expl syntax!
You're in trouble here. Try typing <return> to proceed.
If that doesn't work, type X <return> to quit.
LaTeX Warning: You have requested, on input line 21, version
`' of package xparse,
but only version
` v '
is available.
(f:/texlive/2011/texmf-dist/tex/generic/kastrup/binhex.tex) (f:/texlive/2011/te
xmf-dist/tex/luatex/luaotfload/luaotfload.sty
Package: luaotfload 2011/04/21 v1.25 OpenType layout system
(f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase.sty
Package: luatexbase 2010/10/06 v0.3 Module utilities for LuaTeX
(f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-compat.sty
Package: luatexbase-compat 2010/10/10 v0.3 Compatibility tools for LuaTeX
) (f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-loader.sty
Package: luatexbase-loader 2010/10/10 v0.3 Lua module loader for LuaTeX
(f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase.loader.lua)) (f:/t
exlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-regs.sty
Package: luatexbase-regs 2010/10/10 v0.3 Registers allocation for LuaTeX
) (f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-attr.sty
Package: luatexbase-attr 2011/05/21 v0.31 Attributes allocation for LuaTeX
(f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/attr.lua)) (f:/texlive/2011/t
exmf-dist/tex/luatex/luatexbase/luatexbase-cctb.sty
Package: luatexbase-cctb 2010/10/10 v0.3 Catcodetable allocation for LuaTeX
(f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/cctb.lua)
\lltxb@catcodetable@alloc=\count353
\CatcodeTableIniTeX=\luatexcatcodetable1
\CatcodeTableString=\luatexcatcodetable3
\CatcodeTableOther=\luatexcatcodetable5
\CatcodeTableLaTeX=\luatexcatcodetable7
\CatcodeTableLaTeXAtLetter=\luatexcatcodetable9
\CatcodeTableExpl=\luatexcatcodetable11
) (f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-mcb.sty
Package: luatexbase-mcb 2010/10/10 v0.3 Callback management for LuaTeX
(f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/luatexbase-modutils.sty
Package: luatexbase-modutils 2010/10/10 v0.3 Module utilities for LuaTeX
(f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/modutils.lua))
(f:/texlive/2011/texmf-dist/tex/luatex/luatexbase/mcb.lua)
Lua module: luatexbase-mcb 2010/05/12 0.2 register several functions in a callb
ack
))
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs.lua)
Lua module: lualibs 2011/01/20 0.96 Lua additional functions.
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-string.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-lpeg.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-boolean.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-number.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-math.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-table.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-aux.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-io.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-os.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-file.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-md5.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-dir.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-unicode.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-utils.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-dimen.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-url.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/lualibs/lualibs-set.lua)
(f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/luaotfload.lua)
Lua module: luaotfload 2011/04/21 1.25 OpenType layout system.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
luat-dum.lua.(using cache: C:/Users/Stephan/.texlive2011/texmf-var/luatex-cache
/generic)
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
luat-ovr.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
data-con.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-ini.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
node-dum.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
node-inj.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-tfm.lua.
luatexbase.attributes["otfl@state"] = 1
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-cid.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-ott.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-map.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-otf.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-otd.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-oti.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-otb.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-otn.lua.
luatexbase.attributes["otfl@markbase"] = 2
luatexbase.attributes["otfl@markmark"] = 3
luatexbase.attributes["otfl@markdone"] = 4
luatexbase.attributes["otfl@cursbase"] = 5
luatexbase.attributes["otfl@curscurs"] = 6
luatexbase.attributes["otfl@cursdone"] = 7
luatexbase.attributes["otfl@kernpair"] = 8
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-ota.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-otc.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-def.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-xtx.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-dum.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-nms.lua.
luaotfload: loading file f:/texlive/2011/texmf-dist/tex/luatex/luaotfload/otfl-
font-clr.lua.
Module luatexbase-mcb info: creating 'luaotfload.patch_font' type 4
Module luatexbase-mcb info: inserting 'luaotfload.pre_linebreak_filter'
(luatexbase-mcb) at position 1 in 'pre_linebreak_filter'
Module luatexbase-mcb info: inserting 'luaotfload.hpack_filter'
(luatexbase-mcb) at position 1 in 'hpack_filter'
Module luatexbase-mcb info: resetting callback 'define_font'
Module luatexbase-mcb info: inserting 'luaotfload.define_font'
(luatexbase-mcb) at position 1 in 'define_font'
Module luatexbase-mcb info: inserting 'luaotfload.find_vf_file'
(luatexbase-mcb) at position 1 in 'find_vf_file'
Module luatexbase-mcb info: inserting 'unicodemath.set_sscale_diments'
(luatexbase-mcb) at position 1 in 'luaotfload.patch_font'
)
(f:/texlive/2011/texmf-dist/tex/latex/fontspec/fontspec.lua)
Lua module: fontspec 2009/12/04 2 Advanced font selection for LuaLaTeX.
\l_fontspec_script_int=\count354
\l_fontspec_language_int=\count355
\l_fontspec_strnum_int=\count356
Variant \tl_gset:cV already defined; not changing it on line 83
(f:/texlive/2011/texmf-dist/tex/latex/xkeyval/xkeyval.sty
Package: xkeyval 2008/08/13 v2.6a package option processing (HA)
(f:/texlive/2011/texmf-dist/tex/generic/xkeyval/xkeyval.tex
\XKV@toks=\toks35
\XKV@tempa@toks=\toks36
\XKV@depth=\count357
File: xkeyval.tex 2008/08/13 v2.6a key=value parser (HA)
(f:/texlive/2011/texmf-dist/tex/generic/xkeyval/keyval.tex))) (f:/texlive/2011/
texmf-dist/tex/latex/fontspec/fontspec-patches.sty
Package: fontspec-patches 2011/02/26 v2.1f Advanced font selection for XeLaTeX/
LuaLaTeX
(f:/texlive/2011/texmf-dist/tex/latex/base/fixltx2e.sty
Package: fixltx2e 2006/09/13 v1.1m fixes to LaTeX
LaTeX Info: Redefining \em on input line 420.
)
LaTeX Info: Redefining \em on input line 22.
LaTeX Info: Redefining \emph on input line 29.
LaTeX Info: Redefining \- on input line 32.
) (f:/texlive/2011/texmf-dist/tex/latex/base/fontenc.sty
Package: fontenc 2005/09/27 v1.99g Standard LaTeX package
(f:/texlive/2011/texmf-dist/tex/latex/euenc/eu2enc.def
File: eu2enc.def 2010/05/27 v0.1h Experimental Unicode font encodings
)
LaTeX Font Info: Try loading font information for EU2+lmr on input line 100.
(f:/texlive/2011/texmf-dist/tex/latex/euenc/eu2lmr.fd
File: eu2lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern
)
luaotfload | load font: auto-selecting default features for script: dflt (was l
atn)(load: C:/Users/Stephan/.texlive2011/texmf-var/luatex-cache/generic/fonts/o
tf/temp-lmroman10-regular.lua)) (f:/texlive/2011/texmf-dist/tex/xelatex/xunicod
e/xunicode.sty
File: xunicode.sty 2010/11/06 v0.96 provides access to latin accents and many o
ther characters in Unicode lower plane
)
! Undefined control sequence.
l.330 \DeclareDocumentCommand
\fontspec { O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.330 \DeclareDocumentCommand \fontspec
{ O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! LaTeX Error: Missing \begin{document}.
See the LaTeX manual or LaTeX Companion for explanation.
Type H <return> for immediate help.
...
l.330 \DeclareDocumentCommand \fontspec { O
{} m } {
You're in trouble here. Try typing <return> to proceed.
If that doesn't work, type X <return> to quit.
! Undefined control sequence.
l.332 \fontspec_set_family:Nnn
\f@family {#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.332 \fontspec_set_family:Nnn \f@family {#
1}{#2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.332 \fontspec_set_family:Nnn \f@family {#1}{#
2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.336 \DeclareDocumentCommand
\setmainfont { O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.336 \DeclareDocumentCommand \setmainfont
{ O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.337 \fontspec_set_family:Nnn
\rmdefault {#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.337 \fontspec_set_family:Nnn \rmdefault {#
1}{#2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.337 \fontspec_set_family:Nnn \rmdefault {#1}{#
2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.340 \DeclareDocumentCommand
\setsansfont { O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.340 \DeclareDocumentCommand \setsansfont
{ O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.341 \fontspec_set_family:Nnn
\sfdefault {#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.341 \fontspec_set_family:Nnn \sfdefault {#
1}{#2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.341 \fontspec_set_family:Nnn \sfdefault {#1}{#
2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.344 \DeclareDocumentCommand
\setmonofont { O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.344 \DeclareDocumentCommand \setmonofont
{ O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.345 \fontspec_set_family:Nnn
\ttdefault {#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.345 \fontspec_set_family:Nnn \ttdefault {#
1}{#2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.345 \fontspec_set_family:Nnn \ttdefault {#1}{#
2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.349 \DeclareDocumentCommand
\setmathrm { O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.349 \DeclareDocumentCommand \setmathrm
{ O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.350 \fontspec_set_family:Nnn
\g_fontspec_mathrm_tl {#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.350 ...spec_set_family:Nnn \g_fontspec_mathrm_tl
{#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.350 ...c_set_family:Nnn \g_fontspec_mathrm_tl {#
1}{#2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.350 ...t_family:Nnn \g_fontspec_mathrm_tl {#1}{#
2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.352 \DeclareDocumentCommand
\setboldmathrm { O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.352 \DeclareDocumentCommand \setboldmathrm
{ O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.353 \fontspec_set_family:Nnn
\g_fontspec_bfmathrm_tl {#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.353 ...ec_set_family:Nnn \g_fontspec_bfmathrm_tl
{#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.353 ...set_family:Nnn \g_fontspec_bfmathrm_tl {#
1}{#2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.353 ...family:Nnn \g_fontspec_bfmathrm_tl {#1}{#
2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.355 \DeclareDocumentCommand
\setmathsf { O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.355 \DeclareDocumentCommand \setmathsf
{ O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.356 \fontspec_set_family:Nnn
\g_fontspec_mathsf_tl {#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.356 ...spec_set_family:Nnn \g_fontspec_mathsf_tl
{#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.356 ...c_set_family:Nnn \g_fontspec_mathsf_tl {#
1}{#2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.356 ...t_family:Nnn \g_fontspec_mathsf_tl {#1}{#
2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.358 \DeclareDocumentCommand
\setmathtt { O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.358 \DeclareDocumentCommand \setmathtt
{ O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.359 \fontspec_set_family:Nnn
\g_fontspec_mathtt_tl {#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.359 ...spec_set_family:Nnn \g_fontspec_mathtt_tl
{#1}{#2}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.359 ...c_set_family:Nnn \g_fontspec_mathtt_tl {#
1}{#2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.359 ...t_family:Nnn \g_fontspec_mathtt_tl {#1}{#
2}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.369 \DeclareDocumentCommand
\newfontfamily { m O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.369 \DeclareDocumentCommand \newfontfamily
{ m O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.370 \fontspec_select:nn
{#2}{#3}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.370 \fontspec_select:nn{#
2}{#3}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.370 \fontspec_select:nn{#2}{#
3}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Illegal parameter number in definition of \@tempa.
<to be read again>
1
l.376 }
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Undefined control sequence.
<argument> ...}\exp_not:N \fontfamily {\zf@family
}\exp_not:N \selectfont }
l.376 }
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
LaTeX Info: Redefining # on input line 376.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
}
l.376 }
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Missing control sequence inserted.
<inserted text>
\inaccessible
l.376 }
Please don't say `\def cs{...}', say `\def\cs{...}'.
I've inserted an inaccessible control sequence so that your
definition will be completed without mixing me up too badly.
You can recover graciously from this error, if you're
careful; see exercise 27.2 in The TeXbook.
LaTeX Font Info: Try loading font information for EU2+ on input line 376.
LaTeX Font Info: No file EU2.fd. on input line 376.
LaTeX Font Warning: Font shape `EU2//m/n' undefined
(Font) using `EU2/lmr/m/n' instead on input line 376.
! Undefined control sequence.
l.378 \DeclareDocumentCommand
\newfontface { m O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.378 \DeclareDocumentCommand \newfontface
{ m O{} m } {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.379 \newfontfamily
#1 [ BoldFont={},ItalicFont={},SmallCapsFont={},#2 ] ...
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.379 \newfontfamily #
1 [ BoldFont={},ItalicFont={},SmallCapsFont={},#2 ] ...
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.379 ...dFont={},ItalicFont={},SmallCapsFont={},#
2 ] {#3}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.379 ...{},ItalicFont={},SmallCapsFont={},#2 ] {#
3}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.381 \DeclareDocumentCommand
\defaultfontfeatures {m} {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.381 \DeclareDocumentCommand \defaultfontfeatures
{m} {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.385 \DeclareDocumentCommand
\addfontfeatures {m} {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.385 \DeclareDocumentCommand \addfontfeatures
{m} {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
fontspec warning: \addfontfeature(s) ignored;
(fontspec) it cannot be used with a font that wasn't selected by fontspec.
! Undefined control sequence.
l.402 \DeclareDocumentCommand
\newfontfeature {mm} {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.402 \DeclareDocumentCommand \newfontfeature
{mm} {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
1
l.403 \define@key[zf]{options}{#1}
[]{
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
1
l.403 \define@key[zf]{options}{#1}
[]{
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Illegal parameter number in definition of \zf@[log in to unmask]
<to be read again>
2
l.405 \fontspec_update_featstr:n {#2
}
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Undefined control sequence.
l.408 \DeclareDocumentCommand
\newAATfeature {mmmm} {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.408 \DeclareDocumentCommand \newAATfeature
{mmmm} {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.410 \fontspec_define_font_feature:n
{#1}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.410 \fontspec_define_font_feature:n{#
1}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
1
l.412 \key@ifundefined[zf]{#1}
{#2}{}{
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
1
l.412 \key@ifundefined[zf]{#1}{#2}
{}{
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
1
l.412 \key@ifundefined[zf]{#1}{#2}
{}{
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
1
l.412 \key@ifundefined[zf]{#1}{#2}
{}{
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Undefined control sequence.
l.415 \fontspec_define_feature_option:nnnnn
{#1}{#2}{#3}{#4}{}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.415 \fontspec_define_feature_option:nnnnn{#
1}{#2}{#3}{#4}{}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.415 ...ontspec_define_feature_option:nnnnn{#1}{#
2}{#3}{#4}{}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.415 ...pec_define_feature_option:nnnnn{#1}{#2}{#
3}{#4}{}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.415 ...define_feature_option:nnnnn{#1}{#2}{#3}{#
4}{}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.417 \DeclareDocumentCommand
\newICUfeature {mmm} {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.417 \DeclareDocumentCommand \newICUfeature
{mmm} {
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.419 \fontspec_define_font_feature:n
{#1}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.419 \fontspec_define_font_feature:n{#
1}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
1
l.421 \key@ifundefined[zf]{#1}
{#2}{}{
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
1
l.421 \key@ifundefined[zf]{#1}{#2}
{}{
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
1
l.421 \key@ifundefined[zf]{#1}{#2}
{}{
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Illegal parameter number in definition of \[log in to unmask]
<to be read again>
1
l.421 \key@ifundefined[zf]{#1}{#2}
{}{
You meant to type ## instead of #, right?
Or maybe a } was forgotten somewhere earlier, and things
are all screwed up? I''m going to assume that you meant ##.
! Undefined control sequence.
l.424 \fontspec_define_feature_option:nnnnn
{#1}{#2}{}{}{#3}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.424 \fontspec_define_feature_option:nnnnn{#
1}{#2}{}{}{#3}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.424 ...ontspec_define_feature_option:nnnnn{#1}{#
2}{}{}{#3}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.424 ...define_feature_option:nnnnn{#1}{#2}{}{}{#
3}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.427 \DeclareDocumentCommand
\aliasfontfeature {mm} {\multi@alias@key{#1}{#2}}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.427 \DeclareDocumentCommand \aliasfontfeature
{mm} {\multi@alias@key{#1}{#2}}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! Undefined control sequence.
l.427 ... \aliasfontfeature {mm} {\multi@alias@key
{#1}{#2}}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
! You can't use `macro parameter character #' in horizontal mode.
l.427 ...aliasfontfeature {mm} {\multi@alias@key{#
1}{#2}}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `macro parameter character #' in horizontal mode.
l.427 ...sfontfeature {mm} {\multi@alias@key{#1}{#
2}}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Undefined control sequence.
l.428 \DeclareDocumentCommand
\aliasfontfeatureoption {mmm} {
(That makes 100 errors; please try again.)
Here is how much of LuaTeX's memory you used:
8174 strings out of 495067
100000,154059 words of node,token memory allocated
1548 words of node memory still in use:
4 hlist, 1 rule, 65 glue, 1 penalty, 126 glyph, 61 attribute, 40 glue_spec,
61 attribute_list, 1 temp, 1 write, 2 local_par, 1 dir nodes
avail lists: 3:1,7:1
11365 multiletter control sequences out of 65536+200000
16 fonts using 520631 bytes
48i,0n,33p,247b,72s stack positions out of 5000i,500n,10000p,200000b,50000s
! ==> Fatal error occurred, no output PDF file produced!
|
